WUSD Tech Handbook :: Document Cameras
Document Cameras

The AVerVision document camera can be used to project any document through your classroom projector. These are the steps to setting up your document camera.


• Video Instructions are available at the AVerVision Document Camera resources on the WUSD Online Learning Site.

• Check out the AverVision Teacher's Forum to participate in a discussion on using document cameras in the classroom.
 
Step 1.
 Plug In The Power Cord:

  Step 2.
Plug In The VGA/RGB Cable:

Connect the VGA/RGB cable from the RGB output jack on the document projector into the RGB wallplate for the projector system.

  Step 3. Turn On The Projector: • See directions under Projector Systems.
  Step 4.
Turn The Power On:
 • Turn the power on [1] and make sure that the RGB output light is lit up [2]. In addition, make sure that the "source" button is set to "camera".[7]
  Step 5.
Focus The Camera:

• Use the zoom ring [3] to move the image closer or farther away.

• Flip the head of the camera up and turn on the camerar light to make the document lighter.

• Turn the small ring around the camera lense to focus the document until it is projected clearly on the screen.
         
  More
Resources:
Manuals:
CP300 Quick Reference Guide
CP300 User Manual		 The Quick Reference Guide is recommended for setting up your document camera for the first time.
FAQ Forum:
 WUSD Technology Frequently Asked Questions Forum
(To post a new question you must log in with your WUSD login)		  
WUSD
Online Courses:		 AVerVision Document Camera Detailed video instructions and setting up and using your Document Camera as well as teacher forums on using Document Cameras in the classroom.