Skip Navigation
Projector Systems
The Polevault System is the ceiling-mounted projector and speaker system installed in the classroom.
Step 1.
Turning on the Projector:
  • To turn on the projector you will need to press the "On" button on the wallplate. It will take a moment for the projector to come on.
  • The "On" button should light up on the wallplate, and the projector should be illuminating the screen.
Step 2.
Choosing the Source:
RGB/VGA:
  • This is typically the first button on the wallplate labeled "RGB" or "VGA" (or VCR like the example above).
  • Select this button if you wish to connect a computer or laptop to the wallplate via a RGB/VGA cable.
Note: Make sure to plug the RGB/VGA caple from the computer or laptop into the RGB/VGA jack in the wallplate. If you want audio, you will need a 1/4" miniplug cable to plug from the headphone jack to the PC audio jack on the wallplate.
RCA:
  • This is the second button down on the wallplate which may be labeled "DVD".
  • Select this choice if you want to watch a dvd, vcr, or ipod plugged into the RCA
Note: Make sure to plug the DVD, VCR, or ipod into the RCA wallplate matching the white, yellow, and red jacks with the corresponding chords.
Network:
  • This is the third button down on the wallplate which may be labeled "PC".
  • Select this choice if you want to connect your computer screen via the network connection which is already plugged in your computer.
  • You won't need to use any cables, but you will need to open the program in your program folder labeled "Image Express Utility"
  • Once you open the Image Express Utility you will choose the Broadcom network connection if your computer or laptop is plugged into the wall via a network cable.
  • Finally, you will select the projector on the list that is on and available for connection.

Copyright © 2016 - Whiteriver USD. All rights reserved.

powered by ezTaskTitanium TM